

CRY2120 Noise sensor
CRY2120 Noise sensor is small and has integrated signal conditioning, amplification, sampling and computation circuits. It provides industrial universal RS-485 communication interface / 4-20 mA analog output / Modbus and other data transmission modes.
-
Wide dynamic range
-
Small figure
-
High industrial compatibility

Features of CRY2120
Small volume, stainless steel case, and excellent corrosion resistance
Equipped with precision measurement microphone, internal integrated preamplifier, high precision ADC, and high speed DSP processor
Excellent performance with 110 dB dynamic range, able to measure the noises as low as 25 dBA
Supporting SPL Lxy measurement, X supports A, C, Z frequency weighting modes, y supports F, and S indicates the time weighting mode
Support 1/3 octave analysis
The device uses RS485 bus and our customized communication protocol for data communication, and another version that supports Modbus RTU Communication Protocol is optional.
The products of this series have been widely used in the detection, monitoring and evaluation of noises generated by machinery and equipment, traffic trunks, industrial enterprises, construction sites, and community living environment, etc.
Technical specifications of CRY2120 noise sensor |
---|
Applicable Standards | IEC61672 (Class 1) and GB/T3785 (Class 1) |
Standard Microphone | CRY333 |
Optional Microphone | CRY311(1/2'' to 1'' adaptor required) |
Measurement Range | 25~130dBA (Due to slight differences in the sensitivity of the supported microphones, this value shall be subject to the actual product specification.) |
Dynamic Range | ≥ 110 dB,with no need for measuring range switching |
AD sampling rate | 48kHz |
Detection mode | Full digital |
Receiver noise | 19dB(A)、21dB(C)、27dB(Z) |
Frequency range | 10Hz~20kHz |
Frequency weighting | A、C、Z |
Time weighting | F、S |
Measurement indicator | Lxy(x=A/C/Z,y=F/S) |
Data refresh cycle | 50ms |
Sound pressure level (SPL) output | RS-485;4~20mA,1~5V or 2~10V(either of the three) |
Supply voltage | DC 5-24V(For current output and voltage output, please use high supply voltage for power supply.) |
Overall Dimension | ɸ24.5mm×111mm |
Weight | 115g |
Operating conditions | -10~+50 ℃;RH: ≤ 90% (without condensation) |
-
20 years industry experience
-
24 hours Technical Support
-
Professional engineers on line response
-
2 hours response
Solution within 2 work days -
All life Costs Maintenance