CRY6151B Electroacoustic analysis system
CRY6151B is a full-featured electroacoustic tester newly launched by CRY Sound. It is powerful and stable. It can measure the performance indicators of headphones (USB, Bluetooth, anti-noise), microphones (electret, MEMS, moving-coil type), headphone and microphone assemblies, receivers/headphone speakers, speakers/loudspeakers (common, Bluetooth), loudspeaker crossover devices, and other electroacoustic devices, such as sensitivity (SPL), impedance, distortion (THD), resonance frequency F0, left and right headphone balance, left and right headphone position, phase polarity, microphone current and voltage, SNR, microphone directivity, speaker's TS parameters, telephone receiving and sending loudness ratings, etc. Its test frequency range can be up to 20 Hz - 20 kHz.
-
Flexible customized solutions
-
Supporting Bluetooth test solutions
-
Multi-channel testing
Hardware
CRY6151B has high-performance hardware scalable for synchronous 8-channel acquisition/4-channel output.
Its hardware includes sound card module, power amplifier module, signal processing module, USB communication module. It is combined with software to perform various electroacoustic device tests.
Its compact chassis design and simple USB data communication method can meet customers' various test environment requirements.
Software
CRY6151 V8.X supports WinXP, Windows 7 and Windows 10 (32 & 64-bit) systems (corresponding drivers to be installed. It is necessary to inform the specific operating environment). It has a user-friendly interface and powerful operation functions.
It supports a variety of sweep methods, including effective value, fast-stepping sweep, high precision stepping sweep, multi-tone test, white noise, and pink noise, etc. Choose different methods according to different test occasions and test needs.
Software
CRY6151 V8.X supports WinXP, Windows 7 and Windows 10 (32 & 64-bit) systems (corresponding drivers to be installed. It is necessary to inform the specific operating environment). It has a user-friendly interface and powerful operation functions.
It supports a variety of sweep methods, including effective value, fast-stepping sweep, high precision stepping sweep, multi-tone test, white noise, and pink noise, etc. Choose different methods according to different test occasions and test needs.
Software
The frequency response, sensitivity (SPL), distortion, impedance, F0, phase, balance, polarity and other parameters can be measured and determined in one sweep, with higher test accuracy and faster speed.
It is the earliest domestic instrument that can test Bluetooth audio. It is automatically paired without manual click.
It has the powerful sequence editing function, virtual signal generator, multimeter, and complete storage function, so that it is fully suitable for customers' applications in laboratories and production lines.
| Sound card (model CRY6138) |
|---|
| Number of channels | 4-channel input / 4-channel output (scalable to 8-channel input / 4-channel output) |
| Sampling rate | All channels for simultaneous sampling at 44.1 kHz - 192 kHz, with 24-bit |
| Dynamic range of input | 115 dB typical value |
| Dynamic range of output | 115 dB typical value |
| Noise floor | -115 dBV (1.8 uV), bandwidth 20 Hz - 22 kHz, A-weighted |
| Input/output coupling mode | AC |
| Frequency Response | 20～20kHz（± 0.1dB） |
| THD@1KHz | 0.001% |
| Crosstalk @ 1 kHz | -118dB |
| Signal input |
|---|
| Input amplitude range | Electric signal (- 90 dB to +10 dB); acoustic signal (40 dB - 140 dB) |
| Max. input voltage | 3V |
| Noise floor | -105dBV（5.6uV） |
| ICP microphone power supply | 4-way 2 mA (24 VDC) |
| Traditional microphone power supply | 2-way traditional dual power supply (DB9, software to be customized) |
| EMC electret MIC power supply | 0 - 6.25 V (software control) |
| EMC electret MIC resistance | 0 - 10 kΩ (software control) |
| Measurement |
|---|
| EMC electret MIC current | 0～1mA（±1%） |
| Loudspeaker impedance | 0～2kΩ（±1%），supporting difference, single end |
| Digital I/O |
|---|
| Output | 8-bit output, Max. current = 10 mA |
| Input | 1-bit input (foot switch) |
| Level | High level +5V, low level GND |
| Other |
|---|
| Optional accessories | CRY series mouth and ear simulators CRY series microphone and preamplifier CRY573 Audio Adapter CRY574 Bluetooth Dongle |
| Power supply | 50Hz，220V ± 10% |
| Operating environment | 0～+40℃，RH ≤ 80% |
| Dimension | 330mm X 280mm X 75mm |
-
20 years industry experience
-
24 hours Technical Support
-
Professional engineers on line response
-
2 hours response
Solution within 2 work days -
All life Costs Maintenance
