

GVS7116 Automatic sweep signal generator
GVS7116C Automatic sweep signal generator is an instrument designed for detecting various electroacoustic components (Rattle & Buzz) as well as for their dynamic tests. It is suitable for use in the R&D department, quality control department and production line of manufacturers of speakers, headphones, receivers, buzzers, and sirens, as well as for the inspection of incoming materials in factories that manufacture various electroacoustic products, such as audio factory, telephone factory, earphone factory, speaker factory, and computer multimedia factory, etc. With standard sine wave and low distortion, it is the most suitable for listening to noise from speakers.
-
Easy operation
-
Excellent stability
-
Accurate measurement of F0

Product advantages
Manual or automatic logarithmic sweep is possible. The start/stop sweep range can be arbitrarily set as required.
The voltage value has rough and fine setting buttons. A voltmeter with a resolution up to 0.001 V works with the rough and fine volume adjustment buttons to easily adjust to the required voltage. It is especially easy to set the precise low voltage value required by the receiver and headset.
The F0 value can be tested manually, and the frequency can be fine-tuned. The digital display frequency meter is supported by the frequency fine-tuning button, so the F0 value of the resonance frequency of the speaker can be accurately measured.
Product advantages
The button function is simple and clear, and non-professionals can also use it. Models with different output powers of 20 W, 60 W and 100 W are available and equipped with triple short-circuit protection circuits, which can allow long-term output short circuit without damage to the instrument. Therefore, it can continuously operate without interruption.


Product advantages
The button function is simple and clear, and non-professionals can also use it. Models with different output powers of 20 W, 60 W and 100 W are available and equipped with triple short-circuit protection circuits, which can allow long-term output short circuit without damage to the instrument. Therefore, it can continuously operate without interruption.
Technical specifications of GVS7116 |
---|
Frequency range | 20~20 kHz |
Output voltage amplitude | @ 8 Ω load 7116C (20 W) 0 - 13.5 V 7116C (60W) 0 - 22.5 V 7116C (100 W) 0 - 29.5 V |
Max. output power | 20W,60W,100W |
Sweep mode | Logarithmic sweep |
Sweep width | >1:1000 |
Sweep time | 0.3~40s |
Voltmeter | Digital 3¾ digits, automatic switching Low measuring range: 0.000 V - 3.300 V; resolution: 0.001 V High measuring range: 3.300 V - 40.00 V; resolution: 0.01 V Voltage accuracy: ±0.6% |
Frequency meter | 4-digit digital display; resolution = 1 Hz; error = ±1 Hz |
Total Harmonic Distortion | ≤0.15%(20Hz ~ 20 kHz) |
Min. load impedance | ≥3Ω |
Warm-up time | 15min |
Power supply | 50Hz,220V±10% |
Configuration checklist |
---|
Main unit | 1 set |
Power cord, signal line | 1 set |
-
20 years industry experience
-
24 hours Technical Support
-
Professional engineers on line response
-
2 hours response
Solution within 2 work days -
All life Costs Maintenance