CRY512 Preamplifier
1/2'', 90° angle, IEPE power supply, SMB port
CRY512 IEPE Preamplifier is powered by constant current source and featured by high input impedance, low noise floor, and a wide frequency response range. It can be used with CRY300 series 1/2'' pre-polarization measurement microphones and is also compatible with other brands of measurement microphones, such as B&K and G.R.A.S. The output interface uses a SMB plug and a cable for conversion between SMB and BNC, which can be easily connected to the input terminal of a general instrument. This product is made of stainless steel, which gives it good toughness and makes it suitable for long-term storage. It is applicable to electroacoustic testers, multi-channel analyzers and the like.
-
High industrial compatibility
-
Low noise
-
Wide frequency response range
| Technical specification of CRY512 |
|---|
| Frequency response range | 20 Hz - 50 kHz (±0.2 dB), 10 Hz - 100 kHz (±0.5 dB) |
| Input impedance | >2 GΩ / 0.5 pF |
| Output impedance | <20Ω |
| Distortion factor (THD) | <0.1% |
| Max. output voltage | >5.0 Vrms (+24 V available) |
| Power Supply Mode | IEPE (2 mA - 10 mA) |
| Noise (A-weighted) | ＜3 μVrms |
| Typical operating current | 4 mA |
| Noise, linear (20 - 20 kHz) | ＜10 μVrms |
| Gain | -0.3dB |
| Port type | SMB |
| Applicable temperature range | -30℃ ~ +70℃ |
| Thread interface | 11.7mm x 60UNS （M11.7×0.423mm） |
-
20 years industry experience
-
24 hours Technical Support
-
Professional engineers on line response
-
2 hours response
Solution within 2 work days -
All life Costs Maintenance
