TA0506 - 1/2" Input Adapter (18 pF)
TA0506 - 1/2" Input Adapter (18 pF), for simulating an 18 pF measurement microphone and testing a 1/2-inch preamplifier.
Downloads
Product Highlights
Technical Specifications
Main Features
Related Products
CRY3521 1/2" Preamplifier, BNC connector, Base-type
Frequency Response Range
20Hz to 50k Hz (±0.2 d B); 10Hz to 100k Hz (±0.5 d B)
Input Impedance
＞2GΩ/0.5pF
Output Impedance
＜20Ω
CRY3503 1/2" Preamplifier, IEPE, Microdot Connector, Very Short
Frequency Response Range
1Hz ~ 200kHz (±0.2 dB)
Input Impedance
>26,0.4pF
Output Impedance
＜50Ω
CRY3502 1/2" Preamplifier, IEPE, SMB Connector, Very Short
Frequency Response Range
1Hz ~ 200kHz (±0.2 dB)
Input Impedance
>26,0.4pF
Output Impedance
＜50Ω
A measurement microphone is not just any microphone - it is a precision acoustic sensor designed for traceable, repeatable sound pressure measurement. This guide covers how they work, the different types available, key specifications to compare, and how to select the right one for your application. What Is a Measurement Microphone? A measurement microphone is [...]
In multichannel acoustic testing, entering microphone model numbers, sensitivities, and calibration data one channel at a time is slow and prone to error. TEDS allows a data acquisition system to read key parameters stored in a microphone or preamplifier, helping engineers configure channels faster and maintain consistent test settings. This article tests the CRYSOUND CRY3203-S01 [...]
High SPL Measurement
Learn how to select a working standard microphone for high SPL testing above 160 dB, including distortion limits, test environment requirements, THD data, and CRYSOUND microphone options.
Measurement microphones are used in acoustic metrology, type-approval testing, and engineering measurements. Unlike general audio capture applications, measurement scenarios place far greater emphasis on consistency and traceability: the same microphone should deliver stable output when re-tested over time; variation within a production lot should be sufficiently small; and performance fluctuations between lots should remain controllable. [...]
Get in touch
If you are interested or have questions about our products, book a demo and we will be glad to show how it works, which solutions it can take part of and discuss how it might fit your needs and organization.
