For a long time, many engineers have seen sound calibrators as nothing more than little boxes that output 1 kHz at 94 dB: single-function devices, sensitive to the environment, not particularly pleasant to use in the field—yet still an indispensable link in any acoustic measurement chain.

CRYSOUND’s all-new CRY3018 Sound Calibrator is designed to break this “good enough” mentality and upgrade sound level calibration from a passive, basic tool into an intelligent, reliable, and future-ready measurement reference.

A Class 1 Smart Calibrator Built for the Field

CRY3018 is a portable, high-precision sound calibrator fully compliant with IEC 60942:2017 Class 1. It can serve as a unified calibration reference in laboratories, on production lines, and in field measurements.

Its core capabilities can be summed up in four key phrases:

• Dual-frequency calibration: 250 Hz / 1000 Hz
• Dual sound pressure levels (SPL): 94 dB / 114 dB
• Closed-loop SPL feedback with environmental self-compensation
• Intelligent power management with high-brightness OLED status display

If traditional calibrators are still stuck in the era of fixed-level outputs, the CRY3018 is more like an intelligent calibration platform: it senses the environment in real time and compensates automatically. That’s where its truly disruptive value lies.

Dual Frequencies + Dual Levels: One Device, More Scenarios

In real-world work, a single 1 kHz, 94 dB calibration simply doesn’t cover all scenarios. Some standards or devices require calibration at 250 Hz. In noisy environments, a higher SPL is needed to secure enough signal-to-noise ratio.

CRY3018 tackles all of these needs in one go:

250 Hz / 1000 Hz dual-frequency calibration:

Meets different standards and device requirements for calibration frequency, better reflects the actual measurement bandwidth, and makes it easier to verify system frequency response more comprehensively.

94 dB / 114 dB dual SPL levels:

94 dB covers sensitivity calibration of conventional sound level meters and measurement microphones, while 114 dB effectively cuts through background noise in high-noise environments, ensuring the calibration signal stands out clearly.

Typical performance figures include:

• Frequency accuracy: < 0.5 Hz
• SPL accuracy: < 0.2 dB
• THD+N: < 1%

This means engineers no longer need to carry multiple calibrators with different frequencies and levels. One CRY3018 is enough to cover the vast majority of professional acoustic applications.

Closed-Loop SPL Feedback + Environmental Three-Parameter Compensation: From “Rule-of-Thumb” Calibration to Self-Adaptive Calibration

A major pain point of traditional calibrators is their extreme sensitivity to environmental changes. Even small shifts in temperature, humidity, or atmospheric pressure can introduce significant systematic errors—errors that historically have been estimated based on experience, or simply ignored.

CRY3018 takes a fundamentally different architectural approach:

Built-in SPL feedback system:

It continuously monitors the actual sound pressure in the cavity and forms a closed control loop. If the output drifts, the system automatically adjusts to keep the SPL stable.

Integrated high-precision temperature, humidity, and pressure sensors:

These track three key environmental factors in real time. Combined with intelligent algorithms, the calibrator performs environmental self-compensation, effectively suppressing systematic deviations caused by environmental changes.

In simple terms:

Before: The environment changed, so humans had to worry and estimate.

Now: The environment changes; the calibrator senses it and compensates automatically.

This not only improves consistency and repeatability of measurement results, it also marks a genuine step into an environment-aware, data-driven smart calibration era—upending traditional workflows that relied heavily on experience and manual corrections.

Intelligent Power Management: 5-Minute Fast Charge, Up to 1,000 Calibrations

One of the worst nightmares for field engineers is this: “You’re ready to calibrate, and the calibrator is dead.”

CRY3018’s power system is carefully engineered to avoid exactly that:

• USB-C fast charging with pass-through support (charge and use at the same time)
• About 5 minutes of quick charge provides roughly 1 hour of operation
• A full charge can support close to 1,000 calibration cycles

On top of that, it integrates comprehensive safety and status management:

• Overcharge, over-discharge, and short-circuit protection
• Low-battery warning
• Auto power-on when a microphone is inserted, and auto power-off when removed

In busy production lines or time-critical field tasks, CRY3018 can operate with minimal interruption, dramatically reducing the risk of interrupted testing due to power issues.

Industrial Design and UX for Frontline Engineers

CRY3018 is not just about stacking numbers on a spec sheet. Its emphasis on ergonomics and readability reflects a new product philosophy:

Lightweight, high-strength carbon-fiber composite housing:

• Strikes a balance between weight and robustness; impact-resistant and scratch-resistant, comfortable for long periods of handheld use and frequent transport.

High-brightness OLED display + auto-rotate via gyroscope:

• Whether you hold it vertically or horizontally, the screen automatically rotates to match the orientation. Readings remain clear in bright labs and outdoor environments.

Top status LED + simple, intuitive button logic:

• White flashing: adjusting SPL
• Green solid: SPL stable and ready to use
• Red solid: low battery, shutting down soon
• While charging: yellow flashing; full charge: green solid

Paired with intuitive interactions like short press to power on, long press to power off, and dedicated Hz / dB buttons to switch frequency and level, even first-time users can operate CRY3018 confidently without reaching for the manual.

Full-Size Microphone Compatibility: A Unified Solution from Lab to Line

CRY3018 supports 1″ measurement microphones and, through adapters, is compatible with 1/2″, 1/4″, and 1/8″ sizes, enabling:

• Laboratory-grade measurement microphone calibration
• Sound level meter calibration for environmental noise monitoring systems
• Sensitivity consistency checks for sensors on production lines
• Routine verification of acoustic test systems (audio analyzer + microphone arrays)

For teams managing multiple microphone sizes and numerous test points, CRY3018 can act as a unified acoustic reference source, consolidating fragmented calibration workflows, reducing device variety, and simplifying management in a big way.

More Than a Spec Upgrade: Rethinking How We Do Acoustic Calibration

If you only look at the specs, CRY3018 is a leading, feature-rich Class 1 sound calibrator. But if you look at the entire workflow, it represents a new mindset:

• Calibration is no longer a check-the-box formality, but a smart, quantifiable, and traceable process.
• The environment is no longer an uncontrollable factor, but a parameter that can be sensed and compensated in real time.
• The calibrator is no longer a fixed-level box, but a unified reference platform that spans lab, field, and production line.

What CRY3018 brings is not just a new generation of product—it’s a new answer to the question: What should acoustic calibration look like today?

If your team is looking for a sound calibrator that truly fits both current and future measurement needs, the CRY3018 may be a strong starting point to redefine your entire calibration experience.