Electroacoustic analysis system
Electroacoustic analysis system
  • Electroacoustic analysis system

CRY6151B Electroacoustic analysis system

CRY6151B is a full-featured electroacoustic tester newly launched by CRY Sound. It is powerful and stable. It can measure the performance indicators of headphones (USB, Bluetooth, anti-noise), microphones (electret, MEMS, moving-coil type), headphone and microphone assemblies, receivers/headphone speakers, speakers/loudspeakers (common, Bluetooth), loudspeaker crossover devices, and other electroacoustic devices, such as sensitivity (SPL), impedance, distortion (THD), resonance frequency F0, left and right headphone balance, left and right headphone position, phase polarity, microphone current and voltage, SNR, microphone directivity, speaker's TS parameters, telephone receiving and sending loudness ratings, etc. Its test frequency range can be up to 20 Hz - 20 kHz.

Download
  • Flexible customized solutions
  • Supporting Bluetooth test solutions
  • Multi-channel testing
Features
Hardware

Hardware

  • CRY6151B has high-performance hardware scalable for synchronous 8-channel acquisition/4-channel output.

  • Its hardware includes sound card module, power amplifier module, signal processing module, USB communication module. It is combined with software to perform various electroacoustic device tests.

  • Its compact chassis design and simple USB data communication method can meet customers' various test environment requirements.

Software

  • CRY6151 V8.X supports WinXP, Windows 7 and Windows 10 (32 & 64-bit) systems (corresponding drivers to be installed. It is necessary to inform the specific operating environment). It has a user-friendly interface and powerful operation functions.

  • It supports a variety of sweep methods, including effective value, fast-stepping sweep, high precision stepping sweep, multi-tone test, white noise, and pink noise, etc. Choose different methods according to different test occasions and test needs.

Software
Software

Software

  • CRY6151 V8.X supports WinXP, Windows 7 and Windows 10 (32 & 64-bit) systems (corresponding drivers to be installed. It is necessary to inform the specific operating environment). It has a user-friendly interface and powerful operation functions.

  • It supports a variety of sweep methods, including effective value, fast-stepping sweep, high precision stepping sweep, multi-tone test, white noise, and pink noise, etc. Choose different methods according to different test occasions and test needs.

Software

Software

  • The frequency response, sensitivity (SPL), distortion, impedance, F0, phase, balance, polarity and other parameters can be measured and determined in one sweep, with higher test accuracy and faster speed.

  • It is the earliest domestic instrument that can test Bluetooth audio. It is automatically paired without manual click.

  • It has the powerful sequence editing function, virtual signal generator, multimeter, and complete storage function, so that it is fully suitable for customers' applications in laboratories and production lines.

Technical specification
Sound card (model CRY6138)


Number of channels4-channel input / 4-channel output (scalable to 8-channel input / 4-channel output)
Sampling rateAll channels for simultaneous sampling at 44.1 kHz - 192 kHz, with 24-bit
Dynamic range of input115 dB typical value
Dynamic range of output115 dB typical value
Noise floor

-115 dBV (1.8 uV), bandwidth 20 Hz - 22 kHz, A-weighted

Input/output coupling modeAC
Frequency Response20~20kHz(± 0.1dB)
THD@1KHz0.001%
Crosstalk @ 1 kHz-118dB

Signal input
Input amplitude range

Electric signal (- 90 dB to +10 dB); acoustic signal (40 dB - 140 dB)

Max. input voltage3V
Noise floor

-105dBV(5.6uV)

ICP microphone power supply

4-way 2 mA (24 VDC)

Traditional microphone power supply

2-way traditional dual power supply (DB9, software to be customized)

EMC electret MIC power supply

0 - 6.25 V (software control)

EMC electret MIC resistance

0 - 10 kΩ (software control)

Measurement
EMC electret MIC current0~1mA(±1%)
Loudspeaker impedance

0~2kΩ(±1%),supporting difference, single end

Digital I/O
Output8-bit output, Max. current = 10 mA
Input1-bit input (foot switch)
LevelHigh level +5V, low level GND
Other
Optional accessories

CRY series mouth and ear simulators

CRY series microphone and preamplifier

CRY573 Audio Adapter

CRY574 Bluetooth Dongle

Power supply

50Hz,220V ± 10%

Operating environment

0~+40℃,RH ≤ 80%

Dimension

330mm X 280mm X 75mm

More products
Electroacoustic analysis system
CRY6151
Electroacoustic analysis system
More
Electroacoustic analysis system
CRY6125
Electroacoustic analysis system
More
After-sales services
  • 20 years industry experience

  • 24 hours Technical Support

  • Professional engineers on line response

  • 2 hours response
    Solution within 2 work days

  • All life Costs Maintenance

Activity Registration
If you need to ask the price of CRYSOUND acoustic imager, reserve the free test for a limited time.Please input information and requirements according to the form, and we will arrange engineers to contact you as soon as possible.
*
*
*
*
*
Please select your requirements (pops)*
Consulting the price
Appointment Demo